GoBoard B2 User Manual
www.roboconn.org
Contains confidential and proprietary information which may not be copied, disclosed or
used by others except as expressly authorized in writing by ROBOCONN.
19
disconnected, there is no rider on the skateboard and skateboard is static and perfectly horizontal on the flat ground.
6.7
App Mode Control Sub-Page (Balance Control Mode)
Figure 13
– App Mode Control Sub-Page
This page is used to select one of the 3 control modes in the balance control. When the remote is disconnected and the
balance control is supported on the device, the skateboard enters the balance control mode. The balance control supports
three control modes i.e. beginner mode, advanced mode and custom mode. At any time, one of the modes is always
selected.
6.7.1
Beginner Mode Tab
In beginner mode, the balance control is very safe and soft. The speed is limited to 10 Km/h. This should be enabled for
a beginner. To switch the mode, the skateboard speed must be zero.
6.7.2
Advanced Mode Tab
In advanced mode, the balance control is hard and sensitive. The speed is limit can be set between 10Km/h to 40Km/h.
This the default mode. To switch the mode, the skateboard speed must be zero.
6.7.3
Custom Mode Tab
In custom mode, the user can set the brake and acceleration of balance control from 0 to 100 percent. The default values
are 100 percent for both. The speed is limit can be set between 10Km/h to 40Km/h. To switch the mode, the skateboard
speed must be zero.
