GoBoard B2 User Manual
www.roboconn.org
Contains confidential and proprietary information which may not be copied, disclosed or
used by others except as expressly authorized in writing by ROBOCONN.
15
5.7
Charging Port
The charging port is mini USB connector. The remote should be charged from 5V 1-2A power source via mini USB
cable.
5.8
Remote Battery LED
Remote battery LED represents the remote battery level. When the remote battery is being charged or battery level is
more than 20 percent, the led turns green. If the battery level is less than 20 percent, led turns red indicating the remote
battery needs to be charged.
6.
Mobile Application
The mobile application is used to view the analytics of the skateboard, do custom settings and upgrade the firmware.
There are various pages, views and tabs of mobile application. They are discussed below.
6.1
App Bluetooth Search Page
Figure 7
– App Bluetooth Page
As the mobile application Roboconn is launched on phone, the application prompts the user to turn on the GPS and
Bluetooth. The available Bluetooth devices (only skateboards) are listed and the use can tap to connect with the device.
Once a valid device is connected, the application enters in the speedometer page. This page can also be skipped by the
taping the skip label. In that case, the different pages of application can be viewed but they are not fully functional.
