2. Installation
38
2. Installation
2.1 Transportation
[1] Handling of the Actuator
Unless otherwise specified, the actuator is shipped with each axis unit packaged separately.
(1) Handling the Packed Unit
y
Do not damage or drop. The package is not applied with any special treatment that enables it to
resist an impact caused by a drop or crash.
y
Transport a heavy package with at least more than two operators. Consider an appropriate method
for transportation.
y
Keep the unit in a horizontal orientation when placing it on the ground or transporting. Follow the
instruction if there is any for the packaging condition.
y
Do not step or sit on the package.
y
Do not put any load that may cause a deformation or breakage of the package.
(2) Handling the Actuator After Unpacking
y
Do not carry the actuator by its motor unit or its cable or attempt to move it by pulling the
cable.
y
Hold the base part or bracket section of the body when transporting the actuator main body.
y
Do not hit or drop the actuator during transportation.
y
Do not attempt to force any part of the actuator.
