ROBO Cylinder RCP2 Series Instruction Manual Download Page 32

Page: 32 / 98

1. Specifications Check

• Multi-rotation specification

PCON controller

V 0018 or earlier

PSEL controller

V 0.21 or earlier

[1] Start of home return → [2] Home-sensor detection (when the contact B logic is selected: detection

of the falling edge or ON state of the signal) → [3] Reversing → [4] Home-sensor detection (when the

contact B logic is selected: detection of the rising edge or OFF state of the signal) → [5] Movement

by a specified offset → [5] Home position.

* If home return operation is started with the actuator positioned inside the home-sensor detection

range, the actuator will move out of the home-sensor detection range first and then implement

home return operation.

Home return

Home

(end of forward rotation)

Rotating axis

Movement by a specified offset

Home sensor position

Home-sensor detection range

Multi-rotation specification RTBL/RTCL

[1]

[3]

[4]

[5]

[2]

Caution: The actuator always rotates in the specified direction during home return.

If the home return direction is of standard specification, the actuator always rotates in

the counterclockwise direction.

With an actuator of multi-rotation specification, take note that the actuator always returns

home in the counterclockwise direction from positions outside the home-sensor

detection range shown in the figure. The actuator will not take a short-cut.

If you have guided a cable, etc., through an open hole in the actuator, pay attention to

the load received by the cable.

The cable may be severed if an excessive load is applied.

Summary of Contents for RCP2 Series



































































































Search results

Summary of Contents for RCP2 Series

Reviews:

Related manuals for RCP2 Series

Brands by name

Popular brands

ROBO Cylinder RCP2 Series, Instruction Manual

Search results

Summary of Contents for RCP2 Series

Reviews:

Related manuals for RCP2 Series

Brands by name

Popular brands