Robland T-120 L, Manual

Page: 17 / 50

Removing the spindle fence guide (fig 11)
- When the machine is equipped with a lift arm (option) the spindle fence guide can be removed easily.
- Move the protection forward on the guide plate and place the infeed guide backwards as far as possible.
Proceed to slide the superstructure forward to disassemble the guides.
Important
- Start by unscrewing the 2 barring pens (fig 11.2) that hold the guiding plate when the lift arm is mounted.
- Then proceed to screw the lift arm (fig 11.2) onto the lifting block (fig 11.3).
- Once the spindle fence is completely lifted, the whole system can be pivoted away.
- To post the system back, just push the spindle fence back into place. Repair points are provided on the guiding
plate.
Fig 11
Using the ring guard fence (fig 12)
Attention
It is obligatory to use a ring guard fence made for tools with a maximal diameter of 180 mm.
Description: Ring guard fence for spindle diameter 50 mm.
1) Body spindle protection
2) Guidance template
3) Wood guidance
4) Woodpresser – hand protection
5) Adjustmend button
6) Auto release handle
7) Dust extraction outlet
8) Locking knob
Fig 12
Positioning
The ring guard fence is into 2 holes of the spindle table. Take care both positioning parts are well introduced into
the table.
Adjustments
- Adjust the height of the ring guard fence in function of the place of the tool and the thickness of the wood. Fix
with an Allen key.
- Adjust the height of the pusher (4) in function of the thickness of the wood – a slight pressure of the pusher on
17