Readjusting the engine brake
When the rundown time of the motor exceeds 10seconds, the brake of the motor needs adjustment. This is how
it is done:
without removing the cowling, turn the bolt (9) holding the ventilator fan on the motor axle 1/16
th
of a turn
clockwise and make a brake test. When necessary adjust the brake further until it does not exceed 10 seconds
rundown time.
The air gap between ventilator fan (brake disk) and brake liner (Ferrodo) is factory set at 0,25 mm.
1) moot frame
2) key
3) spring
4) motor axle
5) air gap
6) electromagnet
7) mobile disk
8) locking nut
9) adjustment bolts
10) washer
11) braking disk (cast iron)
12) brake liner (Ferrodo)
Fig 32
25
Summary of Contents for T-120 L
Page 1: ...1...
Page 9: ...General dimensionsT 120 S L P 9...
Page 26: ...26...
