Robertshaw SMART 2000, Owner'S Manual, Page: 37 / 48

37
Press the PROG button again and now the week day flashes. Use the p or 
buttons to set this value to the correct day of the week. Press the PROG button
again to exit the clock set function or wait 30 seconds for the thermostat to auto
exit this menu. Your clock is now set.
Setting Your Desired Temperature
Press and hold the p or  buttons for three seconds. The thermostat display
will change to show the word SET, and the active setpoint for the current mode
(Heating or Cooling). As you hold the
p
or

buttons, the current setpoint will
change.
If Auto mode is selected (shown by both HEAT and COOL on the display) after
adjusting the Heat setpoint, wait without touching a button for three seconds. The
thermostat display will change to show COOL and SET and your current cooling set
temperature. If desired, change this value with the
p
or

buttons. Again, wait
for three seconds for the SMART 2000 to automatically exit this menu. Your new
set temperatures will be maintained.
Switching between Day and Night Setpoints
If the function is set by your installer, the SMART 2000 will keep two sets of
temperatures in its memory, typically used for day and night temperatures. This
provides you with a quick and simple way to change between your day and night
time set temperatures.