Robertshaw SMART 2000, Owner'S Manual, Page: 34 / 48

34
You now have TwO options:
Option 1 - Continue programming as above
Continue to press the PROG button to advance to the next day. Enter START
and then STOP times and then advance to the next day.
OR
Option 2 - Copy Program
To copy the values you have just set to other days of the week, press the p
or  buttons to TAG each additional day you wish to copy the currently set
days program to. When you have finished Tagging the days you desire, press
the PROG button to initiate the copy process. The word COPY will flash briefly
to confirm the copy process, Figure 13, and your current days values will be
copied to the days selected. Normal programming will resume at the next day
to be programmed.
NOTE:
Your thermostat's programs may be controlled from a BMS,
thereby overriding any program you may have entered into the
thermostat as described above. If the BMS is controlling the
thermostat, the word START or STOP will blink in the LCD to
indicate the thermostat program is under BMS control.