31
10. Maintenance and cleaning
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build
up on or within the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances
should alcohol or solvents be used!
DANGER !
Always disconnect the fixture from the mains before starting any maintenance work
If the fixture is connected to mains
, high voltage is present at the heat sink of the lamp
driver and at some parts of this lamp driver in the fixture head !
The front objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing
the light output very quickly. The cooling fans should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
Dichroic colour filters and gobo wheel and the internal lenses should be cleaned monthly.
Remove dust and dirt from the fans and cooling vents using a soft brush and vacuum-cleaner.
More complicated maintenance and service operations are only to be carried out by authorized distributors.
Important! Check the air filters in the fixture head periodically and clean before
they become clogged!
Clean the air filters placed in the fixture head. Use a vacuum cleaner, compressed air or you can wash them
and put back dry.
After replacing the air filters, reset the elapsed time counter in the menu "Information" (
Info--->Air Fil--->Ela T).
11. ChangeLog
This section summarizes all types of changes in the user manual.
Version of the
manual
Date of issue
Description of changes
1.1
11/01/2015
Added items "LA Time" , "Hea Temp" and "Bas Temp" into menu Info.
1.2
13/09/2016
Added
(P/N/ 10980127) ROBE Wireless CRMX to Optional Accessories
1.3
15/01/1018
Optional accessories changed
1.4
30/04/2018
Pan/Tilt specifications corrected
April 30, 2018
Copyright © 2014-2018 Robe Lighting - All rights reserved
All Specifications subject to change without notice
Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici
Lamp driver and its heat sink is
under high voltage!
Air filter (fastened by means of the
velcro fastener )
Air filter (fastened by means of the
velcro fastener )
