Robe ROBIN iPointe65, User Manual

Page: 32 / 66

32
8. NFC
The fixture supports NFC. Using the mobile phone application ROBE COM you can read and set the Robin
iPointe65 parameters (DMX address, IP address...etc.), get information about temperatures, operation hours,
RDM identification etc.
The NFC point is situated on the front panel of fixture´s base.
Download and install the ROBE COM from Google Play (for Android 5.0 and higher) or App Store (for iOS 12.0
and higher) to your mobile phone. Your mobile phone has to support NFC (Near-Field Communication).
Hold the mobile phone on the side of the fixture base, if NFC connection is OK, discovered fixture will appear
on the screen, after touching the fixture name the following the following menu items will appear:
DMX/RDM settings Other settings
Ethernet settings Software versions
Blackout settings Device hours
Colour settings Device temperatures
Display settings
Standalone settings
Pan/Tilt settings
Touch desired menu item to enter its submenu.
MANUFACTURER_LABEL *
DEVICE_LABEL * *
SENSOR_DEFINITION *
SENSOR_VALUE
*
DISPLAY_INVERT
* *
DISPLAY_LEVEL * *
PAN_INVERT * *
TILT_INVERT * *
DEVICE_RESET *
DMX_PERSONALITY * *
DMX_PERSONALITY_DESCRIPTION *
STATUS_MESSAGES *
STATUS_ID_DESCRIPTION *
LAMP_STATE * *
LAMP_ON_MODE
1
* *
DEVICE_HOURS
2
*
LAMP_HOURS
2
*
LAMP_STRIKES
2
*
1
...Another options for this command (only for Robe´s fixtures):
value PARAMETER_DATA=0x84 - lamp OFF by DMX value on DMX channel
value PARAMETER_DATA=0x88 - lamp OFF if DMX is not present
2
...Commands relative resetable values
RDM model ID for the Robin iPointe65 is 0x0116.