29
By using these items you can calibrate and adjust effects to their right positions.
Calibration via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find desired effect and confirm it to enter the fine effect adjustment
screen.
3. Set desired value and save it by pressing the [ENTER] button.
4. Repeat steps 2 and 3 for the next effects.
5. After calibrating all effects, select the [confirm] icon to save all adjusted values and reset the fixture.
Calibration via the DMX controller
1. Connect DMX controller to the fixture and set fixture effects to the desired positions before fine calibration.
2. Enter the "Calibrate Effects" menu and now you can calibrate desired effects by a DMX controller.
There is a calibration protocol:
Effect
Mode 1
Mode 2
Pan
channel 40
channel 35
Tilt
channel 41
channel 36
Cyan
channel 42
channel 37
Magenta
channel 43
channel 38
Yellow
channel 44
channel 39
Colour Wheel
channel 45
channel 40
Effect Wheel
channel 46
channel 41
Static Gobo
channel 47
channel 42
Rot. Gobo Wheel
channel 48
channel 43
R. Gobo Index 1
channel 49
channel 44
R. Gobo Index 2
channel 50
channel 45
R. Gobo Index 3
channel 51
channel 46
R. Gobo Index 4
channel 52
channel 47
R. Gobo Index 5
channel 53
channel 48
R. Gobo Index 6
channel 54
channel 79
R. Gobo Index 7
channel 55
channel 50
R. Gobo Index 8
channel 56
channel 51
R. Gobo Index 9
channel 57
channel 52
Prism W 1
channel 58
channel 53
Pri W. 1 R.1
channel 59
channel 54
Pri W. 1 R.2
channel 60
channel 55
Pri W. 1 R.3
channel 61
channel 56
Prism W 1
channel 62
channel 57
Pri W. 2 R.1
channel 63
channel 58
Pri W. 2 R.2
channel 64
channel 59
Pri W. 2 R.3
channel 65
channel 60
Frost 1/1
channel 66
channel 61
Frost 1/2
channel 67
channel 62
Frost 2/1
channel 68
channel 63
Frost 2/2
channel 69
channel 64
Zoom
channel 70
channel 65
Focus 1
channel 71
channel 66
Focus 2
channel 72
channel 67
Strobe 1/1
channel 73
channel 68
Strobe 1/2
channel 74
channel 69
Strobe 2/1
channel 75
channel 70
Strobe 2/2
channel 76
channel 71
Light Green F
channel 77
channel 72
Frost Filter
channel 78
channel 73
HotSpot 1
channel 79
channel 74
HotSpot 2
channel 80
channel 75
After having calibrated all effects, select the [confirm] to save adjusted values and reset the fixture.
Calibrate Pan/Tilt EMS
- This menu item allows calibration of the pan/tilt
electronic motion stabilizer.
Important: during this calibration any external force must not influence the fixture and the surface at which
the fixture stands (or truss if the fixture hangs) has to be without movement, shake, strokes etc.
Summary of Contents for ROBIN iPointe65
