27
6.5 Tab "Stand-alone"
Test Sequences
-
Use the menu to run test sequences without an external controller, which will show you some
possibilities of using Robin iPointe65.
Dynamic Mode
- This option uses all Robin iPointe65 functions including pan/tilt movement and
therefore is good for a complete introduction of the fixture.
Static Mode
- This option is suitable for projections on the wall, ceiling or ground without
a pan/tilt movement. Adjust the "Pan", "Tilt", "Zoom" and "Focus" to desired positions and select option "Run":
Preset Playback
- This menu allows you to select the program which will be played in a loop after switching
the fixture on (the option is commonly used in a stand-alone operation without an external controller).
None
- The option disables “Presetting playback” function.
Test
- The option starts the test sequences.
Prog. 1
- The option starts user program No. 1.
Prog. 2
- The option starts user program No. 2.
Prog. 3
- The option starts user program No. 3.
Play program
- Use the menu to run desired program in a loop.
Play Program 1
- The option starts user program No.1.
Play Program 2
- The option starts user program No. 2.
Play Program 3
- The option starts user program No. 3.
Edit Program
- Use the menu to create or to edit desired program. The Robin iPointe65 offers 3 free programs,
each up to 100 steps.
Edit Program 1
- The option allows to edit user program No.1.
Edit Program 2
- The option allows to edit user program No.2.
Edit Program 3
- The option allows to edit user program No.3
To edit program:
1. Select the item which you want to edit (“Edit Program 1” - “Edit Program 3”).
2. Select the item "Edit Program Steps".
3. Cofirm the item "Step 1".
4 From the list of effects select desired effect and set its value. Browse throw the list of effects, select and set
desired effects.
The item "Step Time" (value of 0-25.5 sec.) is the time during which effects last in the current step
5. Save adjusted effects to the current step by the [confirm] icon or save and copy them to the following step
by the [copy] icon. By confirming the text box "Preview" next to the current program step you can view
created scene.
6. Repeat the steps 4 and 5 for next program steps.
7. After editing desired program steps, adjust the length of the program by means of the text boxes "Start Step"
and "End Step".
Meaning of the icons used in the "Edit Program" menu:
- Moves down on the next page.
- [confirm]. Saves adjusted values and leaves menu.
- Moves up on the previous page.
- [copy]. Saves values to the current step and copy them
to the following prog. step.
- Leaves menu without saving values.
There is a chart describing behaviour of items "Pan/Tilt Macro" and "P./T. Macro Speed".
DMX
0 - 9
10 - 31
32 - 63
64 - 95
96 - 127
128 - 159
160 - 191
192 - 223
224 - 255
Pan/Tilt Macro
Disabled pan/tilt macro
Reserved
Figure of circle (from small to large)
Figure of horizontal eight (from small to large)
Figure of vertical eight (from small to large)
Figure of rectangle (from small to large)
Figure of triangle (from small to large)
Figure of star (from small to large)
Figure of cross (from small to large)
Summary of Contents for ROBIN iPointe65
