Robe DT Series, User Manual

Page: 23 / 125

RMS-Robe Media Server
23
Update HW processors Software - starts update of the display module.
Update Media Content - starts update of the factory media folders 00-20 (pictures, videos)
Generate Log File --- This item starts generating a log file. The file is saved in a folder "Log" on the hard disk.
This file records events in a certain scope in order to provide an audit trail that can be used to diagnose problems
of the fixture.
Remote servis --- This menu provides necessary items for remote servis of the ROBE Media Server.
12.10 Pixel mapping
The menu serves for pixel mapping of the ArcDots modules.
Actual Mode --- Use the menu to select previously adjusted configuration of the ArcDot modules.
Pixel Mapper Type --- This menu allows to select type of the image edges.
Nearest – sets sharp edges of the projected image.
Linear – sets fuzzy edges of the projected image.
Preview Led Mapping --- This menu item shows current projected image.
Config Mode --- The menu contains options for performing pixel mapping of Led modules.
12.11 Fixture Off
This menu item shuts down the fixture. We strictly recommend to use this function because removing power
directly without the shutdown procedure can reduce fixture reliability.
13. Keystones
13.1 Global keystone parameters
If an image is output from the projector at an angle the image may be skewed. Eight keystone channels ( KeyStone
Top Left X, KeyStone Top Left Y, KeyStone Top Right X, KeyStone Top Right Y, KeyStone Bottom Right X, KeyStone
Bottom Right Y, KeyStone Bottom Left X, KeyStone Bottom Left Y
) adjust the image shape.It is possible to control
each of the four corners of the image and reshape it.
Default DMX value is 0, it means that no keystone correction has been used.
Setting all keystone values to 0 will place all four corners of the image at the four corners of the projector output.
The keystone values can also be used to create interesting skewing effects.
For the picture merging are important both the
KeyStone X-ratio and KeyStoneY-ratio channels for correction of
the image distortion caused by placing projectors at different distances from the final image.