Hubbell Canada LP, Lighting Division
870 Brock Road South, Pickering, ON, L1W 1Z8
Tel. (905) 8391138
For more information, visit our website:
www.hubbellonline.com
INSTALLATION INSTRUCTIONS
Quartz Flood
Q500 / Q300 Series
WARNING
DISCONNECT POWER DURING INSTALLATION AND BEFORE SERVICING.
READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION
SAFETY PRECAUTIONS
1. Do not mount the body of this fixture within an inch of any combustible
material.
2. Do not mount in a closed room or boxedin location where air cannot circulate
around the fixture. The normal operating temperature of a quartz halogen
fixture is very high and requires free air circulation so the fixture will
not over heat.
3. Turn off power before installation and servicing. Before installing consult
local electrical codes for wiring and grounding requirements.
4. For use with 120 volts only.
5. Do not look directly at lighted lamp.
INSTALLATION
1. This unit operates on regular household power. (120V,60HZ)
2. Fixture is supplied with two leads of I~AWG, SF2 wires six inches long.
Connect one to black service wire and other to white service wire, using wire
nuts, crimpon lugs or other approved device. Make sure connections are
secure and no loose wire strands are sticking out of connector. Then, connect
fixture ground wire to house ground wire for grounding requirement.
