RMS-Robe Media Server
86
28.3 System restore
You can perform a system restore on the ROBE Media Server with your System Restore USB flash drive.
Warning.
The system restore replaces all fixture settings and the Media folder content.
This action return the device to a factory state.
For a system restore, you will need:
- the USB flash drive with a System restore utility (part of the ROBE Media Server delivery)
- the USB keyboard
Use the following steps to perform a system restore:
1.
Plug the USB flash drive with System restore utility and the USB keyboard into two external
USB ports on the ROBE Media Server.
2.
Power on the ROBE Media Server. When the fixture boots, press Delete key on the keyboard to enter the
fixture´s computer SETUP and set the boot from USB drive (Path: "Advanced Bios Features" --- >"1st boot
device"----> "[USB]).
3.
Save this setting and exit SETUP. The fixture continues booting, wait until you see a full-screen
menu titled:
Image Manager for ROBE Digital Products
Options:
Write "rescue" for enter to Main Menu
4.
Type the word
rescue
on the keyboard and the following screen will appear:
Options:
Restore From Backup
Restart
5.
Select option "Restore From Backup" to start recovery process This process will take cca 5 minutes.
6.
Select option "Restart" to restart the fixture. After a few minutes you may remove all your external USB
devices. Now the fixture is in a factory state and you should perform update (if required) of graphical
software, HW processors and media content to the current state.
28.4 Cleaning
Turn the power off and disconnect the fixture from the mains before starting cleaning procedure.
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build up
on or within the fixture.
A soft lint-free cloth moistened with water is recommended for cleaning , under no circumstances should alcohol
or solvents be used!
DANGER !
Disconnect from the mains before starting any
cleaning and maintenance work
The interior of the fixture should be cleaned at least annually using an air-jet.
More complicated maintenance and service operations are only to be carried out by authorized dealers.
Specifications are subject to change without notice.
June 10, 2014
Summary of Contents for DT Series
Page 1: ...Version 1 4 ...