Robe DT Series, User Manual

Page: 18 / 125

RMS-Robe Media Server
18
3. Press the [ENTER] to move on the second number of the IP address
4. Repeat steps 2 and 3 for the third and fourth number of the IP address.
If you want to return back on the previously edited number, press [ESC].
The same way you can set the Netmask Address.
Set ArtNet Universe - Select this submenu to set a Universe (0-15).
The Universe is a single DMX 512 frame of 512 channels.
Set ArtNet Subnet - Select the option to set Ethernet subnetworks to which the fixture
belongs (0-15)
After setting all Artnet parameters confirm setting by using the function
"Activate Artnet Mode":
Activate Artnet Mode - Data is received from the Ethernet input.
12.2 Fixture information
DMX Values --- Select this item to read DMX values of each channel received by the fixture.
Media Disk Space Usage --- Select the item to read information about the hard disk space.
Free Disk Space --- Select the item to show a size of free hard disk space (MB).
Used Disk Space --- Select the item to show a size of used hard disk space (MB).
Software Version --- Select this function to read the software version of the fixture´s Graphic Engine .
GPU Info --- Select the item to read information about graphics processing unit, drivers and display device.
Product IDs --- Select the function to read the MAC address and the RDM UID code.
12.3 Personality
Use this menu to modify ROBE Media Server operating behaviour.
Display Adjusting --- This function allows you to change the display settings:
Display Permanent On - This function allows you to keep the display permanent on or
to turn it off after 5 minutes of inactivity of control buttons (wheel)
Display Orientation - Select this function to adjust the display orientation:
Normal orientation
- A standard display orientation.
Rotated Orientation
- Inverts the display by 180°.
Display Mode --- Use this menu to set suitable resolution for connected monitor (monitors):
CRT-I: CRT-I --- On this line is displayed the name of connected monitor (e.g. CRT-I: Philips 170C)
Screen Resolution - the menu item includes the standard list of resolutions, if the monitor
is connected to the “ Master- VGA1” output, this list is extended with another resolutions
supported by the monitor. Default resolution is 1024x768.
Projection Presetting --- Use this menu depending on the installation location of the fixture:
Ceiling Projection --- When this function is "On", a picture is top (bottom and left) right
reversed.This function enables to project the image from a ceiling mounting of
the ROBE Media Server.
Rear projection --- When this function is "On", picture is left (right) reversed.
This function enables to project the image to a rear projection screen.
DMX protocol --- Use this menu to set desired number of gobo/video layers and DMX channels.
Set DMX mode --- the item allow you to select a desired number of control channels
2 Layers - 92 control channels