Super Star
8
Bauanleitung, Assembly instructions, Notice de montage
3113
No.
- Den Zungenkasten 1.4 in den Rumpf
schieben, mittig ausrichten und verkle-
ben. Die Markierung “M 2” muß sich
oben befinden.
- Die Tragflächenhälften probeweise
ansetzen, dabei die Kabel der
Querruderservos nach innen führen.
- Tragflächen mit dem eingeschobenen
Dübel 1.5 sichern.
- Glisser le coffret de languette 1.4 dans
le fuselage, le centrer parfaitement et
le coller. Le repère “M 2” doit se trou-
ver en haut.
- Mettre les demi-ailes en place à titre
d’essai en agençant simultanément les
cordons des servo d’ailerons vers l’in-
térieur.
- Fixer les demi-ailes en mettant la
cheville 1.5 en place.
- Slide the joiner tongue box 1.4 into the
fuselage, set it central and glue it in
place. Note that the marked line “M 2”
must be at the top.
- Slide the wing joiner tongues into the
tongue box, and push the wing panels
against the fuselage, running the
aileron servo leads into the fuselage as
you do so.
- Push the retaining dowel 1.5 into place
to secure the wings.
17
16
18
1.4
“M 2”
1.5