Super Star
20
Bauanleitung, Assembly instructions, Notice de montage
3113
No.
- Kabine 7.4 durch Beschneiden an das
Cockpit 7.5 anpassen.
- Kabine mit 2 Klebebandstreifen „K“
am Cockpit befestigen.
(Die Klebestreifen sind aus
Darstellungsgründen eingefärbt)
- Kabine aufsetzen und an der linken
Kante mit einem Klebebandstreifen
“K” am Rumpf befestigen.
- Kabine aufklappen und innen einen
Klebebandstreifen “K” über die ganze
Länge gegenkleben.
- Trim the edges of the canopy 7.4 to fit
neatly on the cockpit 7.5.
- Attach the canopy to the cockpit using
two strips of adhesive tape “K” (in the
picture the tape is shown coloured to
make it more easily visible).
- Fit the cabin assembly on the fuselage
and attach it using a further strip of
adhesive tape “K” as shown.
- Carefully raise the canopy using the
tape as a hinge, and apply a full-length
strip of tape “K” along the inside of the
hinge line.
- Ajuster la cabine 7.4 au cockpit 7.5 en
la découpant en conséquence.
- Fixer la cabine avec 2 morceaux de
ruban adhésif „K“ au cockpit.
(Pour des motifs de représentation et
de visibilité, les morceaux de ruban
adhésif sont teintés).
- Mettre la cabine en place et la fixer au
fuselage au niveau de l’arête gauche
avec un morceau de ruban adhésif
“K”.
- Rabattre la cabine et contre coller à
l’intérieur sur toute la longueur avec
un morceau de ruban adhésif “K”.
50
51
52
53
7.4, 7.5
“K”
“K”
“K”