Rev 2.0 - 12/03/2020
Page 9 of 16
READ INSTRUCTIONS CAREFULLY BEFORE COMMENCING THIS ACTIVITY.
PROFORM Plastics Ltd
35 Foreman Road, Hamilton, New Zealand 3200
In producing this document PROFORM Plastics Ltd. has relied upon information and representations made by third party suppliers and to the extent permitted by
law PROFORM accepts no responsibility for any losses, faults or damage caused to the vehicle or accessory components that occur due to a failure to properly
follow these instructions.
VOLKSWAGEN OE STYLING BAR FITTING INSTRUCTIONS
Part # 10055955
Instruction #: 10055950
Step 3
• Remove rubber feet and brackets from bar.
• Recycle the fasteners and brackets.
• Keep the rubber feet for later steps.
Step 4
• Using vice grips, break of the M6 threaded boss on
the feet of the bar.
• Recycle the boss.
x4
Step 5
• Drill out hole with Ø11mm drill bit
X4
