Rev 2.0 - 12/03/2020
Page 12 of 16
READ INSTRUCTIONS CAREFULLY BEFORE COMMENCING THIS ACTIVITY.
PROFORM Plastics Ltd
35 Foreman Road, Hamilton, New Zealand 3200
In producing this document PROFORM Plastics Ltd. has relied upon information and representations made by third party suppliers and to the extent permitted by
law PROFORM accepts no responsibility for any losses, faults or damage caused to the vehicle or accessory components that occur due to a failure to properly
follow these instructions.
VOLKSWAGEN OE STYLING BAR FITTING INSTRUCTIONS
Part # 10055955
Instruction #: 10055950
Step 12
• Place rivnut installation bolt into the Ø11mm hole
drilled in the bar.
X4
Step 13
• Use a 17mm spanner to hold the M10 nut
Step 14
•
Ensure installation bolt is held firmly into hole.
• Hold the 17mm spanner.
• Use a 13mm spanner to tighten the M8
