Rev 2.0 - 12/03/2020
Page 2 of 16
READ INSTRUCTIONS CAREFULLY BEFORE COMMENCING THIS ACTIVITY.
PROFORM Plastics Ltd
35 Foreman Road, Hamilton, New Zealand 3200
In producing this document PROFORM Plastics Ltd. has relied upon information and representations made by third party suppliers and to the extent permitted by
law PROFORM accepts no responsibility for any losses, faults or damage caused to the vehicle or accessory components that occur due to a failure to properly
follow these instructions.
VOLKSWAGEN OE STYLING BAR FITTING INSTRUCTIONS
Part # 10055955
Instruction #: 10055950
General Notes
•
.
•
accessory and void the warranty.
• Ensure all recyclable discarded vehicle/accessory components and packaging are disposed following local recycling
regulations.
•
Technician.
• Safely store and protect any removed vehicle components.
• Ensure all bare metal surfaces are protected using Automotive Bare Metal Primer and touch-up paint.
• Remove all metal swarf and dust from all vehicle surfaces if surface is used for accessory installation.
•
• Apply any adhesives to the vehicle only when the surface temperature is between 20°C to 40°C.
• Recommended all smooth lids are painted. Failure to paint lid will void the warranty.
Safety Notes
• Check that all work practises comply with safety standards.
• It is advisable to seek assistance from another person when lifting heavy components.
• While using power tools ensure safe procedures are followed.
• Appropriate clothing & PPE must be worn.
General Vehicle and Accessory Warranty Notes and Cautions
•
•
•
Accessory Fitting Instructions as this may void the
warranty.
