Rev 2.0 - 12/03/2020
Page 10 of 16
READ INSTRUCTIONS CAREFULLY BEFORE COMMENCING THIS ACTIVITY.
PROFORM Plastics Ltd
35 Foreman Road, Hamilton, New Zealand 3200
In producing this document PROFORM Plastics Ltd. has relied upon information and representations made by third party suppliers and to the extent permitted by
law PROFORM accepts no responsibility for any losses, faults or damage caused to the vehicle or accessory components that occur due to a failure to properly
follow these instructions.
VOLKSWAGEN OE STYLING BAR FITTING INSTRUCTIONS
Part # 10055955
Instruction #: 10055950
Step 6
• Using a grinding disc remove the the weld from the
boss.
•
Grind flat.
X4
Step 7
• Peel off the backing paper on the boots foam seals
(item 2)
• Adhere the foam seals to the bottom of the boots
(item 1)
•
Ensure the cut out profile lines up with the boot
2
1
Step 8
• Drill out hole in boots (item 1) with Ø25mm hole
saw
1
X4
