Rev 2.0 - 12/03/2020
Page 8 of 16
READ INSTRUCTIONS CAREFULLY BEFORE COMMENCING THIS ACTIVITY.
PROFORM Plastics Ltd
35 Foreman Road, Hamilton, New Zealand 3200
In producing this document PROFORM Plastics Ltd. has relied upon information and representations made by third party suppliers and to the extent permitted by
law PROFORM accepts no responsibility for any losses, faults or damage caused to the vehicle or accessory components that occur due to a failure to properly
follow these instructions.
VOLKSWAGEN OE STYLING BAR FITTING INSTRUCTIONS
Part # 10055955
Instruction #: 10055950
Step 1
• Instruction text here
For diagrams that less space
use two or three step instruction page master
Step 2
IMPORTANT!
Take care and drill correct holes
• Using pilot holes in the aluminium as a position guide, drill 12ø hole
through second layer of aluminium and ABS
90°
ABS
Aluminium
Aluminium
Drill Ø12mm
Drill Ø12mm
!! Do Not Drill !!
!! Do Not Drill !!
!! Do Not Drill !!
!! Do Not Drill !!
Drill Ø12mm
Drill Ø12mm
Through total thickness
Through total thickness
Through total thickness
Through total thickness
