Rev 2.0 - 12/03/2020
Page 13 of 16
READ INSTRUCTIONS CAREFULLY BEFORE COMMENCING THIS ACTIVITY.
PROFORM Plastics Ltd
35 Foreman Road, Hamilton, New Zealand 3200
In producing this document PROFORM Plastics Ltd. has relied upon information and representations made by third party suppliers and to the extent permitted by
law PROFORM accepts no responsibility for any losses, faults or damage caused to the vehicle or accessory components that occur due to a failure to properly
follow these instructions.
VOLKSWAGEN OE STYLING BAR FITTING INSTRUCTIONS
Part # 10055955
Instruction #: 10055950
Step 15
• Un
screw t
he hex head bolt and remove the rivnut
installation bolt (item 3)
Step 16
Step 17
IMPORTANT! CRITICAL STEP!
• Apply LOCTITIE 243 (not supplied) to the thread of
the rivnut.
• DO NOT allow LOCTITE to touch painted or un-
painted lid
x4
IMPORTANT! CRITICAL STEP!
• Inspect rivnut to ensure it is installed correctly.
• If necessary reinsert rivnut installation bolt (item 3) and
tighten further
• Repeat steps 9 to 16 for other feet.
