RJ45 LED
LED1: Valid data input indicator,of which lighting up indicates that valid data is
being input. The data is PPM or 20CH digital data.
LED2: RF output indicator,of which lighting up indicates that the current input
data is being emitted into the air by the RF.
The meaning of Warning Tones
do, re, mi
Starting to transmit in 2W mode
do, re, mi, fa
Starting to transmit in 5W mode.
mi, re, do
Stop transmitting
mi, do, delay, mi, do
No signal being input into transmitter
do, delay, do,
The transmitter is switched to the re-debug mode.
do, do, do, do ........
Transmitter input signal is lost. There is input signal
line fault.
