The picture above shows the location of the image transmitter antenna.
The picture above shows the position of the GPS antenna.
Binding and Copying the Frequency
Hopping Data
Binding
1 Turn on all of the peripherals, the video transmitters, GPS, the autopilot, the
video recorder and cameras.
2 Press the BIND button on the receiver then power up the receiver , and the
RSSI indicator will blink.
3 Press the transmitter’s BIND button then power up the transmitter.
4 At this time
，
if the receiver receives the binding command, the RSSI indicators
will be lighted and then extinguish one by one, which represent that the receiver is
scanning the interference signal around in detail. This scanning process will probably
continues for 5 seconds.
5 After scanning, the receiver's DONE indicator will be lighted and transmit the
scan report to the transmitter.At this time, the receiver's signal strength LED will
display the current highest EMI values in the employed frequency points. (The less
the LED lights, the situation is better.)
