P
AGE
10
S
AFETY
I
NSTRUCTIONS
C
HAPTER
1
Storage
We recommend storing equipment no longer than a year to avoid loss of the
warranty. Store the equipment under the following conditions.
●
Cool and dry location.
●
Ambient temperature between 0 and 45 °C.
Shipment
Shipment consists of:
●
Equipment in accordance with the confirmation of order,
●
Operating Manual
Check that all parts were delivered.
Obvious damage and / or missing components must be reported in writing within
8 days of receipt of goods. After that, no complaints will be accepted
Installation
►
Install the system in accordance with the following sequence will save you
time and avoid damage which could lead to malfunction.
● Mount the device:
→ Place the unit in a dry, easily accessible and conspicuous place.
→ Drill holes in the wall according to template (typically, these are four
holes) and mount the device using suitable screws (usually four screws).
● Connect the initiators (e.g. level sensor)
● Connect the actuators (for example pumps, valves)
● Connect the power.
Make sure that the supply voltage is correct
for example: 230 VAC or 115 VAC or 24 VAC
For correct supply voltage, refer to the serial number label of the unit
● Program the device (setting of parameters and conditions).
→ Note the information in the manual
NOTE
NOTE
WARNING