manualshive.com logo in svg

RLE Technologies WiNG-MGR, User Manualline

Share
Download
RLE Technologies WiNG-MGR User Manualline Download Page 87

rletech.com

WiNG-MGR User Guide

87

A

P P E N D I X

C

HAPTER

 0

U

PDATE

 F

IRMWARE

Firmware updates are available on the RLE website at 

rletech.com

. Locate the correct 

firmware and download it to an accessible location.

Before updating any firmware, go to the web interface and access the Admin menu, and then 

the Firmware tab. Download the WiNG-MGR’s system configuration file and save it in a safe 

location.

Figure B.1

Admin Menu, Firmware Tab - Configuration File Download

Once firmware is updated, the WiNG-MGR should return to its normal functionality. In very 

rare instances, the WiNG-MGR’s configuration data - all the system configuration and sensor 

information loaded onto the unit - may become corrupted during the firmware update. If the 

configuration files do become corrupted, the downloaded configuration files serves as a 

backup, and can be uploaded to the system to restore the lost data. Use the MIME feature to 

upload the configuration file.

Summary of Contents for WiNG-MGR







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands