manualshive.com logo in svg

RLE Technologies WiNG-MGR, User Manualline

Share
Download
RLE Technologies WiNG-MGR User Manualline Download Page 57

rletech.com

WiNG-MGR User Guide

57

3

  Web Interface

Reset to Factory 

Defaults

If you should need to restore your WiNG-MGR to its factory default 

settings, click this button.

NOTE

 - Clicking the Reset Factory Default button will overwrite all 

system and sensor settings you have established within the 

WiNG-MGR, and will erase all logged data within the unit.

Exit to Bootloader

Click this link to access the WiNG-MGR’s bootloader. 

This feature should be reserved for system updates and 

troubleshooting, and should only be accessed by individuals with the 

technical knowledge to use this feature.

Manager Radio Options

Update Firmware

The WiNG-MGR requires multiple firmware files. When new firmware 

is available for the WiNG-MGR radio, download the file from the 

website and upload the WiNG-MGR radio file here.

Attribute

Description

Table 3.18

Firmware Configuration Options

Summary of Contents for WiNG-MGR







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands