manualshive.com logo in svg

RLE Technologies WiNG-MGR, User Manualline

Share
Download
RLE Technologies WiNG-MGR User Manualline Download Page 63

rletech.com

WiNG-MGR User Guide

63

3

  Web Interface

Temp. Over

Enter a high temperature alarm threshold - if the temperature rises 

above this value, a high temperature alarm is generated.

Check the box to activate the option, and enter a temperature 

value.

Temp. Under

Enter a low temperature alarm threshold - if the temperature drops 

below this value, a low temperature alarm is generated.

Check the box to activate the option, and enter a temperature 

value.

Humidity Over

Enter a high humidity alarm threshold - if the humidity rises above 

this value, a high humidity alarm is generated.

Check the box to activate the option, and enter a humidity value.

Humidity Under

Enter a low humidity alarm threshold - if the humidity drops below 

this value, a low humidity alarm is generated.

Check the box to activate the option, and enter a humidity value.

Alarm Delays

The number of seconds that pass between the time the system 

goes into alarm and the time that alarm is announced.

Check the box to activate the option, and enter a time interval.

Offline Delays

Users can designate how many minutes must pass before the 

WiNG-MGR considers the sensor offline. 

Check the box to activate the option, and enter a time interval.

Global Warning Settings - 

There is a checkbox next to each individual alarm setting. 

Check this box to apply that particular setting to each sensor in the system. If you do not 

check the checkbox next to the alarm parameter, that value will not be applied to the 

sensors in your system.

Temp. Over

Enter a high temperature warning threshold - if the temperature 

rises above this value, a high temperature warning is generated.

Check the box to activate the option, and enter a temperature 

value.

Temp. Under

Enter a low temperature warning threshold - if the temperature 

drops below this value, a low temperature warning is generated.

Check the box to activate the option, and enter a temperature 

value.

Humidity Over

Enter a high humidity warning threshold - if the humidity rises above 

this value, a high humidity warning is generated.

Check the box to activate the option, and enter a humidity value.

Option

Description

Table 3.21

Alarms Configuration Options

Summary of Contents for WiNG-MGR







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands