RLE Technologies WiNG-MGR User Manualline Download Page 62

Page: 62 / 102

WiNG-MGR User Guide

800.518.1519

Web Interface

3.7.5 Alarms

There are a set of global configuration settings that can be applied to all sensors associated

with this WiNG-MGR. Any global settings configured on this page will apply to all the

sensors associated with this WiNG-MGR. If you already have parameters set up for your

sensors, they will be overwritten when you apply these global alarm settings.

Once you apply the global settings, that value will be present on each sensor’s individual

configuration page. The global settings will not be recorded on this page - when you click to

go to another page of the user interface and then return to this global settings page, all the

values in the alarm fields will have reverted back to zeros.

Figure 3.30

Alarms Page

Option

Description

Clear All Alarms

Click this button to clear all active alarms on this WiNG-MGR.

Re-Alarm Function

The WiNG-MGR will re-send an alarm after a point has been in

alarm for a certain number of hours.

Select a re-alarm time from 1-24 hours. Set the re-alarm time to 0 to

disable the feature.

Default: 0 (disabled)

Global Alarm Settings -

There is a checkbox next to each individual alarm setting. Check

this box to apply that particular setting to each sensor in the system. If you do not check the

checkbox next to the alarm parameter, that value will not be applied to the sensors in your

system.

Table 3.21

Alarms Configuration Options

Summary of Contents for WiNG-MGR







































































































Search results

Summary of Contents for WiNG-MGR

Reviews:

Brands by name

Popular brands

RLE Technologies WiNG-MGR, User Manualline

Search results

Summary of Contents for WiNG-MGR

Reviews:

Brands by name

Popular brands