manualshive.com logo in svg

RLE Technologies WiNG-MGR, User Manualline

Share
Download
RLE Technologies WiNG-MGR User Manualline Download Page 55

rletech.com

WiNG-MGR User Guide

55

3

  Web Interface

3.7. Admin

Administrator-exclusive options and capabilities are located in the Admin section.

3.7.1 XML/Logging

The WiNG-MGR collects quite a bit of data. Right click the 

Download File

 button on this 

page and select 

Save Link As

 or 

Save Target As

 to download this data as an XML file. You can 

then take that file and import it into a spreadsheet for viewing, logging, and analyzing.

Figure 3.26

XML/Logging Page

Option

Description

XML Options

Download Sensor 

XML File

Click this link to download sensor information as an .xml file.

Audit Log Options - 

The audit log is a log of all user interaction with the user interface. This 

log will hold 1,000 entries, wrapping in a first in, first out manner.

Enable Audit Log

Click this checkbox to enable the audit log.

View Audit Log

Click this button to view the audit log.

Download Audit Log

Click this button to download the audit log.

Delete Audit Log

Click this button to delete all information from the audit log.

Table 3.17

XML/Logging Configuration Options

Summary of Contents for WiNG-MGR







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands