GX-2012 Operator’s Manual
Using Maintenance Mode • 121
Updating the Bump Test Reminder Setting
With
BP RMNDR
set to
ON
, the GX-2012 will give an indication at start up if it is due
for bump testing. The type of indication will depend on the
BP EXPRD
setting (see
below).
With
BP RMNDR
set to
OFF
(factory setting), the GX-2012 will give no indication at
start up if it is due for bump testing.
NOTE:
If the
BUMP DSP
menu item is set to OFF, this menu item does not appear.
1. Use the AIR
or (SHIFT)
buttons to display the
BP RMNDR
menu item. Press
and release the POWER ENTER button. The screen will indicate the current setting.
2. Use the AIR
or (SHIFT)
button to display the desired setting.
3. Press and release the POWER ENTER button to save the setting and return to the
main menu.
Updating the Bump Test Expired Action Setting
This item defines what indication is given during start up when a bump test is due and
BP
RMNDR
is set to
ON
.
With
BP EXPRD
set to
CONFIRM
(factory setting), the GX-2012 will give an
indication at start up if a bump test is due and require the user to press the RESET
SILENCE button to continue.
With
BP EXPRD
set to
NOT USE
, if the unit is due for a bump test the GX-2012 will
give an indication at start up that the bump test is due and the unit cannot be used until it is
bump tested. With this setting, it is necessary to bump test the instrument from the
Maintenance Mode if a bump test is not performed before it is due. See “Performing a
Bump Test” on page 102 for instructions.
With
BP EXPRD
set to
NO EFFECT,
no confirmation during startup or bump test is
required to use the GX-2012.
NOTE:
If the
BUMP DSP
menu item is set to OFF, this menu item does not appear.
On
MAINTENANCE
BP RMNDR
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
