114 • Using Maintenance Mode
GX-2012 Operator’s Manual
16. Use the AIR
or (SHIFT)
buttons to change the setting and press POWER
ENTER when finished to return to the Alarm Points Screen.
17. When you are finished making adjustments, use the AIR
or (SHIFT)
buttons to
select ESCAPE and press POWER ENTER. You will be returned to the
ALARM--P
screen in the main menu.
Turning the Clear Data Logger Screen On or Off
The
DLOG DSP
menu item allows you to turn the Clear Data Logger Screen on or off.
When set to ON (factory setting), the Clear Data Logger Screen appears in Display Mode
and allows the user to clear any logged data. When set to OFF, the Clear Data Logger
Screen does not appear in Display Mode and any logged data cannot be cleared from
Display Mode.
1. Use the AIR
or (SHIFT)
buttons to display the
DLOG DSP
menu item.
2. Press and release the POWER ENTER button. The screen will indicate the current
setting.
3. Use the AIR
or (SHIFT)
button to display the desired setting.
4. Press and release the POWER ENTER button to save the setting and return to the
main menu.
- - -
ppm
MAINTENANCE
ALARM--P
H
2
S
MAINTENANCE
DLOG DSP
On
MAINTENANCE
DLOG DSP
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
