Index-4 Riverstone Networks RS 8000/8600 Switch Router Getting Started Guide
Q
QoS
application flows
layer-3
layer-4
prioritization
source-destination flows
strict priority queuing
ToS octet rewrites
traffic control queues
traffic control queuing
weighted fair queuing
weighted random early detection
Quad Serial - C/CE line card, overview
Quality of Service
R
RADIUS
redundancy
redundant
redundant CMs
Redundant Control Module
booting from network
redundant Control Modules
backup CM
primary CM
redundant control modules
Redundant CPUs
reset switch
RIP
v1
v2
Riverstone Technical Assistance Center
$
RMON
RMON v2
routing
IP
IPX
L3 lookup tables
routing protocols
,
RS 8000/8600
bridging and VLAN protocols
default name
routing protocols
security
RST switch
RTAC
$
(408) 844-0010
$
$
www.riverstonenet.com/support
$
S
SAP
save active
,
save startup
saving active configuration to startup
saving configuration changes
scratchpad
secondary IP addresses
Secure Session Shells
security
application ACLs
applying ACLs to SNMP
destination ACLs
destination filters
flow ACLs
flow filters
RADIUS
source ACLs
source filters
SSH
TACACS
Serial - C/CE line card, overview
serial port
session persistence
set autoboot bootp
set command
,
,
setting basic system information
setting boot source
setting date and time
setting jumpers
setting passwords
setting system contact
setting system location
setting system name
setting trap target
setting up SNMP
shield grounding
skipconfig
SNMP
applying ACLs
community string
disabling authentication traps
