![Riverstone Networks RS 8000 Getting Started Manual Download Page 62](http://html1.mh-extra.com/html/riverstone-networks/rs-8000/rs-8000_getting-started-manual_1466193062.webp)
2-38 Riverstone Networks RS 8000/8600 Switch Router Getting Started Guide
Hardware Overview
Introduction
Per-GBIC AN
Green
– indicates that the port hardware has auto negotiated the operating mode of the link
between full-duplex and half-duplex.
Orange (intermittent)
– indicates that auto negotiation is in process.
Orange (solid)
– indicates a problem with auto negotiation configuration.
Red
– indicates an auto negotiation failure. This fault may occur if the link partner does not
support full duplex.
Off
– indicates that auto negotiation has been disabled or the link is down.
Per-GBIC LINK
Green
– indicates that the port hardware detects a cable plugged into the port and a good link
is established.
Red (intermittent)
– indicates that port hardware received an error during operation.
Red (solid)
– indicates that the port hardware detects a cable plugged into the port, however, a
bad link is established.
Off
– indicates that no link from the port exists.
Table 2-31 Gigabit GBIC line card LEDs (Continued)
LED
Description