3-2 Riverstone Networks RS 8000/8600 Switch Router Getting Started Guide
Hardware Specifications
Hardware Installation
3.2
HARDWARE SPECIFICATIONS
The following table lists the physical and environmental specifications for the RS 8000 and RS 8600.
3.3
INSTALLING THE HARDWARE
Follow the procedures and steps in this section to install the RS 8000/8600 hardware. Note that some steps may apply
only to either the RS 8000 or RS 8600. By the end of this section, your RS 8000/8600 should be ready for initial
power-on.
3.3.1
Verifying Your Shipment
Before you begin installing your RS, check your shipment to ensure that everything you ordered arrived securely.
Open the shipping box(es) and verify that you received the following equipment:
•
RS 8000 or RS 8600 chassis, containing:
-
backplane
-
fan module
-
console cable
•
RS 8000 or RS 8600 power supply
•
One country-specific power cable per power supply (AC only)
•
One Control Module
•
One Switching Fabric Module (RS 8600 only)
•
RS Media Kit, containing:
-
One PC flash card containing the RS system software
-
Riverstone Networks RS 8000/8600 Switch Router Getting Started Guide
Table 3-1
Physical and Environmental Specifications
Specification
RS 8000
RS 8600
Dimensions
Inches: 8.27” x 17.25” x 12.25”
Centimeters: 22.23cm x 43.82cm x
31.12cm
Inches: 8.27” x 17.25” x 19.25”
Centimeters: 22.23cm x 43.82cm x
48.9 cm
Weight
Pounds: 24
Kilograms: 10.8
Pounds: 47
Kilograms: 21.2
Power
100-125 VAC, 5A maximum;
200-240 VAC, 3A maximum
100-125 VAC, 10A maximum;
200-240 VAC, 6A maximum
Operating temperature
Fahrenheit: 41
o
F to 104
o
F
Centigrade: 5
o
C to 40
o
C
Fahrenheit: 41
o
F to 104
o
F
Centigrade: 5
o
C to 40
o
C
