WWW.RSIWW.COM
18 of 45
B-1
B-1
B-1
F-10
F-6
F-6
F-8
F-8
F-1
F-10
3.6A
Insert eleven T-bolt assemblies in slots in B-1 connectors. Fit B-1 connector to profiles as shown.
3.6B
Secure B-1 connectors as shown.
NOTE: ALL VIEWS FROM INSIDE.
Connector
QTY
S-7
11
Connector
QTY
B-1
3
S-2C
11
NOTE: ALL VIEWS FROM INSIDE.
F-7
F-6
G-1
F-8
W-1
F-6
F-7
F-8
F-10
W-1
F-1
W-1
F-6
F-7
F-10
F-10
F-1
F-8
W-1
W-1
F-6
F-7
F-10
F-10
F-1
F-8
W-1
W-1
F-10
F-10
F-1
F-8
W-1
The two sets of F-6 and F-10 profiles fit on top of W-1 panels. Line up bottom bolt
channels with top edge of F-1 and F-7 vertical profiles. Profiles will fit snugly.
3.3A
Working from inside right corner, place
F-6 profile with mitered end next to
corner and angled edge facing up onto
corner W-1 panel. F-6 profile fits
snugly between F-7 corner profile
and F-8 back profile.
3.3B
Continue along back wall. Place first F-10 profile
on next W-1 panel. Make sure profile fits snugly
between F-8 back profile and F-1 wall profile.
3.3c
Place second F-10
profile on next W-1
panel and ensure it
fits snugly between
F-1 wall profile
and F-8 back
profile.
3.3D
Place second F-6 profile with mitered end next to
corner and angled edge facing up onto corner W-1
panel. F-6 profile fits snugly between F-7 corner
profile and F-8 back profile.
Profile
2
F-6
F-10
2
23”
23”