WWW.RSIWW.COM
25 of 45
B-2
S-2C
S-2D 2
1
S-7
5
Connector
QTY
Connector
QTY
S-2A 2
S-2B 2
5
D-7
1
Profile
QTY
F-5
F-4
1
1
17¼”
47
¼”
IMPORTANT: F-4 profile is centered to F-5 profile and secured on inside with B-2 connector.
Prepare one F-5 profile. Slide four
T-bolts into bolt tracks and position as shown.
Place one end of F-4 profile against F-5 profile on flat level surface.
Center F-4 profile to F-5 profile. Insert a T-bolt assembly into the top
slot of the B-2, place the B-2 in position and adjust T-bolts to fit B-2
connector. Secure with two additional S-2C caps.
Prepare D-7 latch. Fit S-8 bolts in holes in D-7
latch. Line up with S-2A and S-2D nuts under
latch. Screw together. Do not tighten.
Using wrench, tighten 2-SC caps to hold D-7 latch in place.
Turn profiles over and place on flat
surface. Slide D-7 latch into bolt
track of F-4 profile and slide to
bottom where two profiles meet.
5.4A
5.4B
5.4c
5.4e
5.4D
F-5
F-5
F-4
F-5
F-4
F-5
F-4
F-5
B-2
22”
( 560mm)
22”
( 560mm)
F-4
F-5
B-2
D-7
S-2A
S-2D
S-2C
S-2B
S-2A
S-2D
S-2C
S-2B
S-8
D-7
F-4
F-5
D-7
F-4
F-5
D-7
