32
SteelConnect SDI-5030 Gateway Hardware Installation Guide
Replacing SteelConnect Gateway SDI-5030 Components
Replacing power supply units
Replacing power supply units
This section describes how to replace a power supply. This gateway is equipped with replaceable, hot-
swappable power supply units.
Caution:
Use caution when replacing the power supply units; they can become hot to the touch.
To replace a power supply unit
1.
Locate the defective power supply unit and remove the power cord.
2.
Press the release tab toward the black handle, and pull the power supply unit toward you.
Figure 3-13. Removing the power supply unit
Power supply 1 (PS1) is on the left, and power supply 2 (PS2) is on the right.
3.
Pull the power supply unit out of the chassis.
Caution:
Put the defective power supply unit aside; wait until it cools down before touching it.
