30
SteelConnect SDI-5030 Gateway Hardware Installation Guide
Replacing SteelConnect Gateway SDI-5030 Components
Replacing memory modules
The disk drive LED lights blue when connected.
Figure 3-10. Inserting the disk drive
9.
Press in the disk-drive handle to close it.
The new disk drive runs through a self-test automatically. The disk drive automatically begins proper
operation with the other disk drives. You do not need to set up or configure the new disk drive.
Important:
It takes approximately 3 to 4 hours to rebuild a new disk drive. You can configure the system to send an
email to the administrator user when the disk drive has finished rebuilding.
Replacing memory modules
Figure 3-11
illustrates the memory module slot locations.
Figure 3-11. Memory module slot locations
When adding new memory to the gateway, add the memory in the blue slots first. Once the blue slots
are full, populate the black slots. Use the lowest lettered and numbered slots first.
