RITE-HITE Rave RHC 1234567-001, Installation And Owner'S Manual

Page: 13 / 56

RAVE ® FAN
Pub. No. 54450034 Rev. 4 - © DECEMBER 2014
13
CEILING TRUSS MOUNTING
(RITE-HITE–FORMED ANGLES) The truss kit supplied by Rite-Hite is designed
to make installation of the kit easier.
The two formed angles span existing building
trusses. Figure 7 shows how the brackets are
used to secure the angles to the building
trusses while setting the gap between the
angles for the 3 x 3 in. (75 x 75 mm) drop tube.
Several mounting positions have been cut into
the angles to allow for flexibility in positioning
the fan.
NOTE: When the truss kit is ordered from
Rite-Hite, the standard I-beam ceiling bracket
will not be provided.
Figure 7
WARNING
!
!
Never mount the fan to only one
building joist. Always mount the
fan to two joists. One joist will
not provide the rigidity and
support necessary for the fan
during operation, and may cause
the fan to fall and cause injury.