RITE-HITE Rave RHC 1234567-001, Installation And Owner'S Manual

Page: 15 / 56

RAVE ® FAN
Pub. No. 54450034 Rev. 4 - © DECEMBER 2014
15
MOTOR BRACKET
ATTACHMENT OF MOTOR BRACKET
The motor bracket attaches to the extension
tube with two 1/2 x 4-1/2 in. Grade 8 bolts,
washers, and locknuts.
1. Position the motor bracket so that one angle
is on each side of the extension tube.
2. Insert the bolts through the holes in the
angles at the top of the motor bracket and
through the extension tube and back through
the second angle.
3. Tighten both locknuts securely.
4. When an extended down tube is used, the
smaller square tubing (3 x 3 in. [75 x 75
mm]) will telescope inside the larger square
tubing (3-1/2 x 3-1/2 in. [90 x 90 mm]). The
brackets on the top of the motor bracket are
bolted in slots to allow the larger tube to bolt
to the top of the motor. The 3 x 3 in. (75 x 75
mm) tube should always bolt to the ceiling
bracket.
5. If the fan assembly is mounted directly to the
ceiling bracket without an extension tube,
use four 1/2 x 1-1/2 in. Grade 8 bolts (not
provided) to bolt the brackets together
properly.
Figure 8