RITE-HITE FASTRAX, Manual

Page: 10 / 44

10 PUB. NO. FASTRAXC FEBRUARY 2008
FASTRAX ™
12. At the end of the track, drive a self-tap screw into the
curtain groove to prevent curtain top roller from coming
out of track.
13. Diagonal bracing will be completed after the curtain is
installed and the door is ran to the open position. This is
done to allow the curtain fabric to seat and move the track
in the most friction free position.
14. When curtain is raised later in installation, make sure
spheres are centered in track groove, if too tight, move
tracks in, if too loose spread tracks apart,
Figure 18.
STANDARD / HIGH UPPER TRACK INSTALLATION
FIGURE 18 - HIGH
FasTrax = O.D.W. + 5 1/2” [+ 1/8"/-0]
FasTrax FR = O.D.W. + 14” [+ 1/8"/-0]
Upper Track Bracing
Track Splice/Wall
Mounting Bracket
O.D.H.
Ordered Door Height
Radius
Track Wall
Mounting Bracket
DIM 'X' =
DIM 'A' + 30”
DIM 'Y' =
DIM 'B' + 20''
DIM 'B' =
O.D.H. - DIM 'A'
FIGURE 19 - HIGH
High Lift Track
High Lift Track
Radius & Splice
Self/Tap Drill
Screws
Drill .201Ø Pilot
Hole 1 1/4” Deep
for Lag Screws
Wall Mount Bracket
Make Sure
Spheres are
Centered in Groove
FIGURE 19A - 45°
Track
Self/Tap Drill
Screws
45° Radius & Splice Drill
.201Ø Pilot Hole 1 1/4”
Deep for Lag Screws
FIGURE 6 - CONNECTORS
UPPER TRACK
UNIVERSAL
90° RADIUS
UNIVERSAL
45° RADIUS
UNIVERSAL
Minimum 6"x6"
Backer Plate
Required on
Non-Concrete
or Steel Walls
DIM 'A'
Minimum 6"x6"
Backer Plate
Required on
Non-Concrete
or Steel Walls