Riso RP-255, Technical Manual

Page: 394 / 449

TEST MODE
[ 18 - 27 ]
No. Model
787 Editor Data Skip Range Adjustment
Description
Range: 0 to +255 (0 mm to +25.5 mm)
Unit: 1 (0.1 mm)
Default: 0 (0 mm)
790 RLP Printing-Position Adjustment (Main Scan)
Adjusts the linked printer printing position (main scanning direction).
* This setting affects all linked printers w hen multiple linked printers are used.
Range: -50 to +50 (-50 mm to +50 mm) * + indicates the dow nw ard direction.
Unit: 1 (0.1 mm)
Default: 0 mm
791 RLP Printing-Position Adjustment (Sub-Scanning)
Adjusts the linked printer printing position (sub-scanning direction).
* This setting affects all linked printers w hen multiple linked printers are used.
Range: -50 to +50 (-50 mm to +50 mm) * + indicates the leftw ard direction.
Unit: 1 (0.1 mm)
Default: 0 mm
792 0 Print Warning Indication ON/OFF
Description
Range: 0 (Without w arning), 1 (With w arning)
Default: 0 (Without w arning)
793 RLP Hold Output Enable/Disable
Description
Range: 0 (Disabled), 1 (Enabled)
Default: 1 (Enabled)
794 RLP Both-Side Automatic Reset
Description Turns OFF the both-side setting or sets the automatic reset at the end of both-side printing.
Range: 0 (OFF), 1 (Reset)
Default: 1 (Reset)
795 Resolution-Conversion Processing Pattern (Text/Photo)
Range: 0 (Random interpolation), 1 (Normal interpolation)
Default: 0 (Random interpolation)
* Cannot be selected from the menu screen.
796 Resolution-Conversion Processing Pattern (Text/Photo, Dot)
Range: 0 (Normal interpolation), 1 (Random interpolation)
Default: 0 (Normal interpolation)
* Cannot be selected from the menu screen.
Link-mode
machine
Data settings
* Note: A change in the interpolation method does not alw ays improve the image quality.
Depending on the type of original, the image quality may degrade. Therefore, use this
function carefully.
For linked printer output in the text/photo mode and dot mode of the link-mode machine,
resolution conversion is based on “normal interpolation,” but “random interpolation” can
produce better image quality depending on the type of original. This parameter allow s the
interpolation method to be changed.
* Note: A change in the interpolation method does not alw ays improve the image quality.
Depending on the type of original, the image quality may degrade. Therefore, use this
function carefully.
Setting
Setting
Setting
Sets the scanning distance after the digitizer receives digitizer VSYNC (ignores noise in the
initial section).
Setting
400 dpi
Link-mode
machine
When the automatic sorting function is ON, the master-making operation starts w hen the print
number is 0 in the P-to-P mode. This parameter sets w hether the w arning (F60) is displayed
before the master-making operation starts.
Sets w hether to hold output temporarily w hen output is produced from the linked printer
sorter, stacker, or by electronic sorting using the AF.
For linked printer output in the text/photo mode of the link-mode machine, the resolution
conversion is based on “random interpolation,” but “normal interpolation” can produce better
image quality depending on the type of original. This parameter allow s the interpolation
method to be changed.
Description
Setting
Description
Setting
Setting
Description
Setting
Description