Riso RP-255, Technical Manual

Page: 175 / 449

MASTER CLAMP SECTION
[ 9 - 6 ]
A
B
E
F
C
D
G
2. Removing the Clamp Motor, Clamp Sensor A, Clamp Sensor B
Removing the Clamp Motor
(1) Remove the clamp unit.
(2) Remove the E-ring and remove the worm gear [A].
(3) Unplug the connector [C], remove the mounting screws, and remove the clamp motor [B].
Removal of Clamp Sensor A
(1) Remove the clamp unit.
(2) Remove the mounting screws (RS tight, M3 x 6: 2 pcs) and remove the shaft support bracket [D].
(3) Unplug the connector and remove the clamp sensor A [E].
Removal of Clamp Sensor B
(1) Remove the clamp unit.
(2) Remove the mounting screw (RS tight, M3 x 6: 1 pc) and remove the sensor bracket [F].
(3) Unplug the connector and remove the clamp sensor B [G] from the sensor bracket [F].
A: Worm gear
B: Clamp motor
C: Connector
D: Shaft support bracket
E: Clamp sensor A
F: Sensor bracket
G: Clamp sensor B
0910
0911