Before Starting to Use
Control Panel
16
Control Panel
1)
Check & Error Display (
)
p.64)
Indicates error locations and status.
2)
Energy Saving Indicator
Lights when the machine is in the Sleep (energy saving)
Mode.
Print operations cannot be performed when this indicator
is lit. Press the Start/Wake-up key to activate the
machine.
3)
Indicator (
)
p.64)
4)
Print Quantity Keys (0 to 9 Keys)
Use to enter the number of pages to be printed or to
enter other numeric values.
5)
Print Quantity Display (Error number display)
Shows the number of printed pages, numeric values
entered for various settings, and error numbers.
6)
P Key/Indicator (
)
p.39)
Use to set up and retrieve programs.
(programed printing)
When activated, the indicator above the key lights.
7)
Key
Use when setting up for programed printing.
8)
Auto-Process Key/Indicator (
)
p.33)
Performs non-stop operation from master-making
through printing.
When activated, the indicator above the key lights.
9)
Master-Making/Print Change over Key/Indicator
Changes over the machine operation between Master-
Making and Print modes. The indicator on the left side of
the key shows the current mode.
10)
Proof Key (
)
p.34)
Use when you want to check print result after adjusting
the print position, for example.
This allows you to print sample copies without affecting
the value on Print Quantity Display.
11)
Reset Key
Returns all settings to the initial settings.
12)
Key
Use when setting up for programed printing or when
changing the initial settings.
13)
Print Speed Adjustment Key/Indicator (
)
p.36)
Selects the print speed from two levels.
The indicator above the key shows the current speed
level.
14)
Vertical Print Position Adjustment Keys/
Indicator (
)
p.35)
Adjusts the print position in vertical direction (within 10
mm (
3
/
8
")) after making a master.
The indicator above the keys shows the offset amount
from the center.
To clear the offset amount, press
.
15)
Key
Use to perform programed printing or to display the error
number if an error occurred.
16)
C Key
Cancels entered numeric values or resets the counter to
zero.
17)
Start/Wake-up Key/Indicator
Starts master-making or printing process, or executes
specified operations.
The key is lighted only when the key is active.
Use to cancel the sleep mode.
18)
Stop Key
Stops operation in progress.
KZ30_UG.book Page 16 Monday, December 21, 2009 11:11 AM
