Riso KZ30 User Manual Download Page 50

Page: 50 / 82

Replacing the Ink Cartridge

Replacing and Disposing

Consumables

Replacing the Ink Cartridge

When the Ink Cartridge becomes empty, the Replace Ink Cartridge Indicator lights. Replace with a new Ink Cartridge.

Caution:

• Because ink may have adhered to the outlet surface of the Print Drum (Cylinder), be careful not to get your hands

and clothes dirty.
Rinse your hand using a detergent immediately if stained with ink.

Important!:

• For the Ink Cartridge, it is recommended to use the products specified by RISO.
• Before replacing the Ink Cartridge, turn the machine on.

Press the

key.

Make sure that the Print Drum (Cylinder) Release
indicator is tuned on.

Important!:

• If you forcibly pull out the Print Drum (Cylinder)

when its release indicator is turned off, the Print
Drum (Cylinder) may be damaged.

Pull out the Print Drum (Cylinder).

Grasp the Print Drum (Cylinder) Handle and pull
out the Print Drum (Cylinder) until it stops.

KZ30_UG.book Page 50 Monday, December 21, 2009 11:11 AM

Summary of Contents for KZ30



















































































Search results

Summary of Contents for KZ30

Reviews:

Related manuals for KZ30

Brands by name

Popular brands

Riso KZ30, User Manual

Search results

Summary of Contents for KZ30

Reviews:

Related manuals for KZ30

Brands by name

Popular brands