Check & Error Display
64
Troubleshooting
Check & Error Display
When an error occurs on the machine or when consumables or other sections are not yet ready, the Check & Error
Display shows error locations and numbers indicating error types. For some errors, error numbers are shown on the
Error Number Display (Print Quantity Display).
Checking with the Check & Error Display
Besides indicators that show error types, numbers that show error locations light.
Check the display and take an appropriate procedure according to the methods described on the subsequent pages.
1)
Error Location Indicator
Numbers corresponding to error locations light.
2)
Error Type Indicator
•
(LOW INK CARTRIDGE) Indicator
Blinks when the remaining ink quantity is small, and
lights when the entire ink is consumed.
•
(LOW MASTER ROLL) Indicator
Blinks when the remaining master quantity is small,
and lights when the entire master is consumed.
•
(EMPTY DISPOSAL BOX) Indicator
Lights when the Master Disposal Box is filled with dis-
carded masters.
•
(JAM) Indicator
Lights when original or paper jams occur inside the
machine or DF Unit.
•
(CHECK SETTINGS) Indicator
Lights when the Print Drum (Cylinder), or other items
have not been set up yet.
•
(CALL SERVICE) Indicator
Lights when such an error occurs that needs advices
or supports from service personnel.
3)
Error Number Display
Error numbers appear and blink on the Print Quantity
Display.
Error contents are shown with alphabetical characters
(single digit) and numeric characters (two digits).
4)
Indicator
This machine controls its printing functions by collecting
the “matching information” from the consumables being
loaded on the machine.
When the indicator lights up:The matching information
has been collected and the printing functions are control-
led normally.
When the indicator goes out:The matching information
has not been collected. The matching information needs
to be entered.
)
p.7
1
5)
Energy Saving Indicator
Lights when the machine is in the Sleep (energy saving)
Mode.
Print operations cannot be performed when this indicator
is lit. Press the Start/Wake-up key to activate the
machine.
KZ30_UG.book Page 64 Monday, December 21, 2009 11:11 AM
