Riso KZ30 User Manual Download Page 40

Page: 40 / 82

Advanced Features

Automatic Sorting into Groups [Program]

Press the Master-Making / Print
Change over key.

The machine switches into the master-making
mode.

Make necessary settings.

Make various settings as necessary.
You can set the following functions:

• Image Processing Mode
• Pencil
• Scanning Level Adjustment
• Enlargement/Reduction
• Auto-Process
• 2-UP Printing

Press the

key.

A proof copy is printed.
Check the print result, and if necessary adjust the
print position and other items.

Press the

key again.

Printing is started with the last programed group.

Important!:

• When printing is finished for all groups, the pro-

gram content is cleared. However, it is not
cleared if “Auto-Process” has been set to ON.

Note:

• Printing is stopped each time a routine for one

set is finished. Remove printed pages from the
Paper Receiving Tray or put separation paper.

• To interrupt printing, press the

key. Press

the

key to resume printing.

KZ30_UG.book Page 40 Monday, December 21, 2009 11:11 AM

Summary of Contents for KZ30



















































































Search results

Summary of Contents for KZ30

Reviews:

Related manuals for KZ30

Brands by name

Popular brands

Riso KZ30, User Manual

Search results

Summary of Contents for KZ30

Reviews:

Related manuals for KZ30

Brands by name

Popular brands